Open firewall ports required for AQtivate connection

Open firewall ports required for AQtivate connection

In order to connect to an AQ-200 series IED with AQtivate setting tool the following ports in the firewall must be open: 20, 21 and 1551. If the connection to the relay fails, please check the settings of your firewall and anti-virus softwares.

    • Related Articles

    • Downloading AQtivate 200 setting tool

      To download AQtivate 200 setting tool visit our website https://arcteq.fi/ and log in to our website. Once logged in you should find download link for AQtivate 200 installer at https://arcteq.fi/downloads/ To get full use of the features included in ...

    • Windows systems supported by AQtivate setting tool

      AQtivate setting tool for AQ-200 series IEDs supports any version of Windows 7, 8 and 10. Other operating systems might be able to launch the software but we can't guarantee good performance.

    • Upgrading AQ-200 series IED firmware

      Firmware file is a zipped file and is labelled in following style e.g. like this (v1.0.1-97-g14e806f.zip). The firmware file appears to be a zip file but DON’T UNZIP this file. AQtivate setting and configuration tool does this automatically when ...

    • 3-phase, 3-wire ARON input connection example

      This chapter presents a connection example of an application with protection current transformers for just two phases. Connection is suitable for both motor –and feeder protection applications. ARON input connection can measure load symmetrically ...

    • AQtivate setting tool not starting up

      Arcteq AQ-200 series AQtivate setting tool can be run by any Windows 7,8 or 10 version. Windows XP support has ended since 2018. If AQtivate fails to start up with any of the supported Windows versions, check if CD burner software called Roxio is ...